The OWI-650 LP-WIVIS™ has been designed from the ground up for quick deployment anywhere. The LP- WIVIS is the first present weather and visibility sensor designed for battery powered or solar powered applications.
The LP-WIVIS™ is more than just a sensor. It is a system. Other sensors includingMore wind, temperature, relative humidity, and barometric pressure may be easily added. The LP-WIVIS™ serves as both sensor and data acquisition system. No separate data acquisition system is required.
The fully automated instrument provides accurate visibility, present weather and precipitation measurement in a single sensor. This next generation intelligent sensor uses all digital signal processing (DSP) for no-drift high-accuracy results. OSi's patented environmentally adaptive algorithms use artificial-intelligence technology derived from over 25 year's experience and over 200 million field hours of real-world data from our sensors installed around the world. The result is the most advanced/easily deployable weather sensor in the world.
The LP-WIVIS™ is already a low power present weather and visibility sensor but to further reduce the power requirements the LP-WIVIS™ may be operated in intermittent mode. In intermittent mode, the sensor is automatically powered up for one minute, reports present weather and visibility measurements and then is powered down. The heaters are independently controlled. In many environments the heaters are never powered on. Advanced detection algorithms report dew or frost on lens and control heater function.
The LP-WIVIS™ measures visibility and detects and quantifies rain, snow, drizzle, freezing and mixed precipitation conditions. The sensor is designed for year-round continuous operation in all climates from Antarctica to tropical rain forests.
Thanks to the advanced DSP electronics, the typical need for field calibration is completely eliminated. OSi Sensors are widely used by airports and regional DOT's across the US and throughout the world. No other present weather and visibility sensor can provide this powerful combination of high performance, low power, quick deployability and proven reliability! No other company can provide the proven level of support and customer satisfaction that OSi does!
Rechargeable batteries, solar power kits, spread spectrum radios, and additional sensors are all available options. Less
The LP-WIVIS™ is more than just a sensor. It is a system. Other sensors includingMore wind, temperature, relative humidity, and barometric pressure may be easily added. The LP-WIVIS™ serves as both sensor and data acquisition system. No separate data acquisition system is required.
The fully automated instrument provides accurate visibility, present weather and precipitation measurement in a single sensor. This next generation intelligent sensor uses all digital signal processing (DSP) for no-drift high-accuracy results. OSi's patented environmentally adaptive algorithms use artificial-intelligence technology derived from over 25 year's experience and over 200 million field hours of real-world data from our sensors installed around the world. The result is the most advanced/easily deployable weather sensor in the world.
The LP-WIVIS™ is already a low power present weather and visibility sensor but to further reduce the power requirements the LP-WIVIS™ may be operated in intermittent mode. In intermittent mode, the sensor is automatically powered up for one minute, reports present weather and visibility measurements and then is powered down. The heaters are independently controlled. In many environments the heaters are never powered on. Advanced detection algorithms report dew or frost on lens and control heater function.
The LP-WIVIS™ measures visibility and detects and quantifies rain, snow, drizzle, freezing and mixed precipitation conditions. The sensor is designed for year-round continuous operation in all climates from Antarctica to tropical rain forests.
Thanks to the advanced DSP electronics, the typical need for field calibration is completely eliminated. OSi Sensors are widely used by airports and regional DOT's across the US and throughout the world. No other present weather and visibility sensor can provide this powerful combination of high performance, low power, quick deployability and proven reliability! No other company can provide the proven level of support and customer satisfaction that OSi does!
Rechargeable batteries, solar power kits, spread spectrum radios, and additional sensors are all available options. Less
Unit of Measure
Performance Specifications
|
Physical Specifications
|
Electronic Specifications
|
Heaters
|
Environmental Specifications
|
Optional Sensors
Performance Specifications
Measurement Technique |
N/A Scintillation with optical forward scatter and optional acoustic* |
Data Reporting Update Rate |
N/A 1 min |
Present Weather Codes Reported |
N/A More than 50 NWS and WMO codes |
Present Weather Type Identification |
N/A Rain, freezing rain, snow, freezing drizzle, mist, mixed, fog, haze, clear, hail and ice pellets* |
Snow/Rain Accumulation |
N/A 0.001 to 999 mm |
Snow/Rain Measurement Resolution |
N/A 0.001 mm |
Rain Dynamic Range |
N/A 0.1 to 3000 mm/hr |
Rain Measurement Accuracy (Accumulation) |
N/A 5 % |
Snow Dynamic Range |
N/A 0.01 to 300 mm/hr |
Snow Measurement Accuracy (Accumulation) |
N/A 10 % |
Hail/Ice Pellet Reporting Accuracy |
N/A Correct ID better than 90% of time* |
Visibility/RVR Dynamic Range (Metric and ANSI Units Available) |
N/A 0.001 to 10+ km0.001 to 7.1 mile |
Visibility/RVR Time Constant (Harmonic) |
N/A 3 min |
Visibility/RVR Contrast Threshold |
N/A 5 % |
Ambient Light Dynamic Measurement Range |
N/A 0 to 9,990 candles/m² |
Physical Specifications
Cable Length |
N/A 12 ft3.7 m |
DSP-WIVIS Sensor Size |
N/A 21 x 8 x 4 in53 x 20 x 10 cm |
DSP-WIVIS Sensor Weight |
N/A 4.25 lb1.9 kg |
Electronic Specifications
Power Requirements |
N/A 10-18 VDC |
Direct Current (DC) Supply Voltage |
N/A 3.6 V |
Current |
N/A 375 mA |
Transient Protection |
N/A All power & signal lines fully protected |
Signal Output |
N/A RS-232 ASCII, simple polled protocol |
Environmental Specifications
Temperature |
N/A -40 to 60 ºC-40 to 140 ºF |
Humidity |
N/A 0 to 100 % |
Precipitation/Dust |
N/A NEMA 4 type protection |
Optional Sensors
Optional Sensors |
N/A
Wind Sensor 2100-130 The 2100-130 is designed to operate within a temperature range of -30º to +70º C and with wind speeds up to 167 mph (75 m/s). Wind speed is measured using a sealed reed switch which provides a series of pulses at a rate proportional to wind speed. Aluminum cups are used for durability and strength. Temperature/RH Probe 2100-110 The Model 2100-110 temperature humidity probe offers high accuracy and is designed for meteorological applications. The probe has separate 0 - 1 VDC linear outputs for temperature and humidity. Best Value Pressure Sensor 2100-101-1 Low cost, accurate and stable barometric pressure sensor. The glass fused ceramic capacitive sensing capsule features inherent thermal stability, and low hysteresis. High Accuracy Pressure Sensor 2100-101-2 The Model 2100-101-2 barometric pressure sensor is designed for use in environmental applications that require excellent accuracy, fast dynamic response, and long-term stability and reliability. |
